The slide show below shows the step by step production process for our Reclaimed Old Ship Wood Mosaics.
-
Source an old ship
-
Dismantle the ship
-
Dismantle the ship
-
Dismantle the ship
-
Sort the wood
-
Sort the wood
-
Sort the wood
-
Remove all of the nails
-
Remove all of the nails
-
Cut the wood into planks
-
Cut the wood into planks
-
Cut the wood into planks
-
Dry the wooden planks
-
Trim the planks to their required size
-
Trim the planks to their required size
-
Adjust the chip size
-
Assemble the wooden mosaics on to the mesh backing
-
Polish the wood
-
Spray water borne paint on to the surface of the wood
-
Inspect the completed products
-
Cover finished products in protective film
-
Carefully package the completed products
-
Prepare for shipping